Class A Fire Rated Plywood is a plywood that has been processed with special processes to meet Class A fire resistance standards.

Multi-Layer Solid Wood Panels is a type of plywood, which is made by spinning wood chips into thin veneers or slicing them into thin wood, and then bonding them with adhesive to form three or more layers of plates.

Flame Retardant Plywood is a kind of plywood that has been processed with special processes and has fire resistance.

Flame-retardant hardwood plywood is made of multiple layers of hardwood veneers stacked in an interlaced manner and bonded together with adhesive to form a stable hierarchical structure. This structure gives the plate higher strength and stability, enabling it to withstand greater loads and deformations, and is suitable for a variety of complex engineering applications.

Engineered Wood Panels is a high-performance material widely used in modern architecture and home design. It not only has the beauty of natural wood, but also enhances its stability and durability through advanced process technology.

Affordable Furniture Board Panels for Shelving is a type of plywood, which is made by spinning wood chips into thin veneers or slicing them into thin wood, and then bonding them with adhesive to form three or more layers of plates.

The raw materials are mainly solid wood materials such as eucalyptus, and the manufacturing process mainly involves drying, sizing, directional paving, and hot pressing of flakes of a certain geometric shape (usually 50-80 mm long, 5-20 mm wide, and 0.45-0.6 mm thick). The formaldehyde emission of OSB is low and it is strong and durable.

The surface of the board substrate has undergone special treatment, adding a layer of PET film with a thickness of 0.35-0.6 mm. This Durable PET Door Panels for Kitchens has a delicate texture and soft luster, and is not prone to leaving fingerprints or oil stains.

It is a Moisture Resistant Particle Board for Shelving Solutions made of wood or wooden poles, crushed logs, with fine wood fibers on both sides and long wood fibers in the middle, which is glued under heat and pressure with adhesive. The panel finish is usually melamine finish, and its cross section presents a honeycomb shape.

Sustainable Multi-Layer Wood Composite Boards eucalyptus raw materials are assembled layer by layer using environmentally friendly glue, and the surface is covered with multi-layer plywood with melamine veneer, which has the characteristics of high cost performance and strong nail holding force.